Welcome to my online directory, this area is great for SEO descriptions!

Call Us Now
1 818 843 3624 Internet Sales
1 866 204 0340
*** NEW ADDRESS *** 2000 N. Lincoln St. Burbank, CA 91504-3333
 
 

Bon Transmitter System

image3

image2

A/V Transmitted through Obstacles

When you are out of sights, the signal might still reach through obstacles.

Distance up to 500m (1600 feet, with Directional Antenna)
Transmits Multi Format Video Signal (~ 1080p/60)
Max 50Mbps Encoding Bitrate
Supports 3G HD-SDI
Transmits Audio Input (Line Level Stereo Mic In)
Real Time Transmitter Selection
Bi-Directional Data Link at 11Kbps
Supports Time Code
Tally Control (Tally LED, Return Tally) via GPIO Port
Low Power Consumption(10W)
Automatic Encoding Rate Adjustment for RF Condition
Signal Protection with 802.11i
No Special FCC License (U-NII-1 and U-NII-3) Required
The Adoption of MIMO
Automatically Detects HD-SDI / SD-SDI

BW-100STV
Input
1 x BNC HD/SD-SDI, 3G/1.485G/270M
1 x HDMI HDMI, (with HDCP v.1.1), 19pin Female
Audio Input
1 x Mini Jack In 3.5mm TRS, Line Level Input
Video Formats
HD 1920 x 1080 (60p, 59.94p, 50p)
1920 x 1080 (60i, 59.94i, 50i, 30p, 29.97p, 25p, 24p, 23.98p)
1920 x 1080 (30psf, 29.97psf, 25psf)
1280 x 720 (60p, 59.94p, 50p)
SD NTSC, PAL
Output
1 x BNC SDI Active Loop Output
Radio
Frequency U-NII-1(5.15~5.25 GHz), U-NII-3(5.725~5.85 GHz
Transmission Power 20mW(13.5dBm)
Transmission Distance 150m(500 feet), 500m(1600 feet, with special antenna)
Latency 20ms
Encoding/Decoding H.264 Base Profile @4.2
Antenna 2T x 2R SMA Female
Security 802.11i compatible signal protection by 128bit AES encryption
Multiple Receivers up to 4. (Maximum distance may decrease due to signal division)
General
1 x GPIO GPI-7 Port, RJ-45P Jack
2 x mini_USB F/W Update ( MAIN , MICOM)
4 x LED Power, Link, Battery, Tally
4 x Switch Reset, Pairing, Input Selection, Power
Battery V-Mount
Power Requirements DC (7V~17V) or AC Adaptor(100 ~ 230V, 50Hz/60Hz)
Power Consumption 10W
Operating Temperature 0°C ~ 40°C (32°F ~104°F)
Operating Humidity 20% ~ 80% RH
Weight 1.02kg
Dimension 152.2 x 90.0 x 42.2 mm (5.9 x 3.5 x 1.6 inch)

BW-100SRV
Ouput
2 x BNC HD/SD-SDI, 3G/1.485G/270M
1 x HDMI HDMI Out
General
1 x IR Remote Control Unit
1 x GPIO GPI-7 Port, RJ-45P Jack
1 x mini USB for Firmware Update
4 x LED Power, Link, Battery, Tally
Battery V-Mount
Power Requirements DC (7V~17V) or AC Adaptor(100 ~ 230V, 50Hz/60Hz)
Power Consumption 9W
Operating Temperature 0°C ~ 40°C (32°F ~104°F)
Operating Humidity 20% ~ 80% RH
Weight 1.02kg
Dimension 152.2 x 90.0 x 42.2 mm (5.9 x 3.5 x 1.6 inch)
※ This specifications are subject to change without prior notice.

Useful Information

Bon Transmitter System
Category Support Gear
Posted Tuesday, May 28th, 2013

Leave a Comment

One Response to “Bon Transmitter System”

  1. […] will be showing: BON HD Transmitter FDR2 Solid State Qtake System RedBytes Decimator Products IO Industries Flare2K […]

 

 
 
 

Follow Us

 
 

© Copyright 2017. Copyright Inter Video 2017 Terms & Conditions | Privacy Policy

 

 
SiteLock